adapt sony-wf1000xm3-battery page to new styles

Signed-off-by: Robert Günzler <r@gnzler.io>

1 files changed, 25 insertions, 25 deletions

diff --git a/src/inc/sony-wf1000xm3-battery.htm b/src/inc/sony-wf1000xm3-battery.htm
index 74c7b08..3692a32 100644
--- a/src/inc/sony-wf1000xm3-battery.htm
+++ b/src/inc/sony-wf1000xm3-battery.htm
@@ -7,8 +7,8 @@ replacement</h1>
 <p>I’ve had these since 2021, while they are a bit bulky I am happy with
 them and use them mostly around the city to listen to podcasts and the
 occasional bit of music.</p>
-<p><img
-src="/media/content/sony-wf1000xm3-battery/headphones.jpg" /></p>
+<p><img src="/media/content/sony-wf1000xm3-battery/headphones.jpg"
+class="size-l" /></p>
 <p>After they would first slowly show signs of not holding their full
 charge anymore, the batteries completely died on me after some 3 years.
 I was fully prepared to have to throw them out when I learned that the
@@ -22,38 +22,38 @@ batteries are just standard cells and can be easily swapped.</p>
 </ul>
 <p>Ok, let’s go:</p>
 <p><img src="/media/content/sony-wf1000xm3-battery/01_pry_open.jpg"
-class="sm left" alt="pry open" /> <img
+class="size-s float-l" alt="pry open" /> <img
 src="/media/content/sony-wf1000xm3-battery/02_lid_off.jpg"
-class="sm right" alt="lid off" /> Use a spudger or ideally two guitar
-picks and wedge them in to the thin gap between the top cover and the
-base of the earphones. Don’t worry about breaking anything. As long as
-the material of your tools is plastic, you won’t damage anything. This
-is by far the most tedious step of the process (if you don’t have the
-picks). There is a little bit of adhesive behind the lid, so once you
-get the halfs to seperate you might have to widdgle a little.</p>
+class="size-s float-l" alt="lid off" /> Use a spudger or ideally two
+guitar picks and wedge them in to the thin gap between the top cover and
+the base of the earphones. Don’t worry about breaking anything. As long
+as the material of your tools is plastic, you won’t damage anything.
+This is by far the most tedious step of the process (if you don’t have
+the picks). There is a little bit of adhesive behind the lid, so once
+you get the halfs to seperate you might have to widdgle a little.</p>
 <p><img src="/media/content/sony-wf1000xm3-battery/03_screws_out.jpg"
-class="sm left" alt="screws out" /> <img
+class="size-s float-r" alt="screws out" /> <img
 src="/media/content/sony-wf1000xm3-battery/04_lift_top.jpg"
-class="sm right" alt="lift top" /> With the phillips head remove the two
-screws that secure the visible part in place and then carefully lift it
-out, flip it over. There is a ribbon cable connecting the touch sensor
-and LED on the top to PCB deeper inside the earpiece.</p>
+class="size-s float-r" alt="lift top" /> With the phillips head remove
+the two screws that secure the visible part in place and then carefully
+lift it out, flip it over. There is a ribbon cable connecting the touch
+sensor and LED on the top to PCB deeper inside the earpiece.</p>
 <p><img src="/media/content/sony-wf1000xm3-battery/05_battery_out.jpg"
-class="sm left" alt="battery out" /> To remove the old battery I found
-it easiest to push the spudger into the little gap in the plastic where
-the ribbon cable connects to the top part. It is also glued in; be
+class="size-s float-l" alt="battery out" /> To remove the old battery I
+found it easiest to push the spudger into the little gap in the plastic
+where the ribbon cable connects to the top part. It is also glued in; be
 careful not to pull out the contact points as well. If possible try to
 preserve the glue, it will come in handy when securing the new battery
 in place. I also scraped off what was stuck to the old battery and
 pushed it back into the housing.</p>
 <p><img src="/media/content/sony-wf1000xm3-battery/06_battery_in.jpg"
-class="sm right" alt="battery in" /> Before putting in the new battery
-make sure to check the writing on it or use the shape as a reference to
-figure out which side is the negative pole. Put that side down, touching
-to the contacts. The replacement batteries I got where a different brand
-and had all the labeling on the plus pole. While the original VARTA
-branded batteries had it exactly reversed. On my first attempt I didn’t
-pay attention and put them in the wrong way around.</p>
+class="size-s float-r" alt="battery in" /> Before putting in the new
+battery make sure to check the writing on it or use the shape as a
+reference to figure out which side is the negative pole. Put that side
+down, touching to the contacts. The replacement batteries I got where a
+different brand and had all the labeling on the plus pole. While the
+original VARTA branded batteries had it exactly reversed. On my first
+attempt I didn’t pay attention and put them in the wrong way around.</p>
 <figure>
 <img src="/media/content/sony-wf1000xm3-battery/battery_comparison.jpg"
 alt="battery comparison" />