start new

Signed-off-by: Robert Günzler <r@gnzler.io>

1 files changed, 0 insertions, 339 deletions

diff --git a/os/etc/bluetooth/main.conf b/os/etc/bluetooth/main.conf
deleted file mode 100644
index 9d1575a..0000000
--- a/os/etc/bluetooth/main.conf
+++ /dev/null
@@ -1,339 +0,0 @@
-[General]
-
-# Default adapter name
-# Defaults to 'BlueZ X.YZ'
-#Name = BlueZ
-
-# Default device class. Only the major and minor device class bits are
-# considered. Defaults to '0x000000'.
-#Class = 0x000100
-
-# How long to stay in discoverable mode before going back to non-discoverable
-# The value is in seconds. Default is 180, i.e. 3 minutes.
-# 0 = disable timer, i.e. stay discoverable forever
-#DiscoverableTimeout = 0
-
-# Always allow pairing even if there are no agent registered
-# Possible values: true, false
-# Default: false
-#AlwaysPairable = false
-
-# How long to stay in pairable mode before going back to non-discoverable
-# The value is in seconds. Default is 0.
-# 0 = disable timer, i.e. stay pairable forever
-#PairableTimeout = 0
-
-# Use vendor id source (assigner), vendor, product and version information for
-# DID profile support. The values are separated by ":" and assigner, VID, PID
-# and version.
-# Possible vendor id source values: bluetooth, usb (default) or false (disabled)
-#DeviceID = bluetooth:1234:5678:abcd
-
-# Do reverse service discovery for previously unknown devices that connect to
-# us. For BR/EDR this option is really only needed for qualification since the
-# BITE tester doesn't like us doing reverse SDP for some test cases, for LE
-# this disables the GATT client functionally so it can be used in system which
-# can only operate as peripheral.
-# Defaults to 'true'.
-#ReverseServiceDiscovery = true
-
-# Enable name resolving after inquiry. Set it to 'false' if you don't need
-# remote devices name and want shorter discovery cycle. Defaults to 'true'.
-#NameResolving = true
-
-# Enable runtime persistency of debug link keys. Default is false which
-# makes debug link keys valid only for the duration of the connection
-# that they were created for.
-#DebugKeys = false
-
-# Restricts all controllers to the specified transport. Default value
-# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
-# Possible values: "dual", "bredr", "le"
-#ControllerMode = dual
-
-# Maximum number of controllers allowed to be exposed to the system.
-# Default=0 (unlimited)
-#MaxControllers=0
-
-# Enables Multi Profile Specification support. This allows to specify if
-# system supports only Multiple Profiles Single Device (MPSD) configuration
-# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
-# Devices (MPMD) configurations.
-# Possible values: "off", "single", "multiple"
-#MultiProfile = off
-
-# Permanently enables the Fast Connectable setting for adapters that
-# support it. When enabled other devices can connect faster to us,
-# however the tradeoff is increased power consumptions. This feature
-# will fully work only on kernel version 4.1 and newer. Defaults to
-# 'false'.
-#FastConnectable = false
-
-# Default privacy setting.
-# Enables use of private address.
-# Possible values for LE mode: "off", "network/on", "device"
-# Possible values for Dual mode: "off", "network/on", "device",
-# "limited-network", "limited-device"
-#
-# - off: Local privacy disabled.
-#
-# - network/on: A device will only accept advertising packets from peer
-# devices that contain private addresses. It may not be compatible with some
-# legacy devices since it requires the use of RPA(s) all the time.
-#
-# - device: A device in device privacy mode is only concerned about the
-# privacy of the device and will accept advertising packets from peer devices
-# that contain their Identity Address as well as ones that contain a private
-# address, even if the peer device has distributed its IRK in the past.
-
-# - limited-network: Apply Limited Discoverable Mode to advertising, which
-# follows the same policy as to BR/EDR that publishes the identity address when
-# discoverable, and Network Privacy Mode for scanning.
-#
-# - limited-device: Apply Limited Discoverable Mode to advertising, which
-# follows the same policy as to BR/EDR that publishes the identity address when
-# discoverable, and Device Privacy Mode for scanning.
-#
-# Defaults to "off"
-#Privacy = off
-
-# Specify the policy to the JUST-WORKS repairing initiated by peer
-# Possible values: "never", "confirm", "always"
-# Defaults to "never"
-#JustWorksRepairing = never
-
-# How long to keep temporary devices around
-# The value is in seconds. Default is 30.
-# 0 = disable timer, i.e. never keep temporary devices
-#TemporaryTimeout = 30
-
-# Enables the device to issue an SDP request to update known services when
-# profile is connected. Defaults to true.
-#RefreshDiscovery = true
-
-# Default Secure Connections setting.
-# Enables the Secure Connections setting for adapters that support it. It
-# provides better crypto algorithms for BT links and also enables CTKD (cross
-# transport key derivation) during pairing on any link.
-# Possible values: "off", "on", "only"
-# - "off": Secure Connections are disabled
-# - "on": Secure Connections are enabled when peer device supports them
-# - "only": we allow only Secure Connections
-# Defaults to "on"
-#SecureConnections = on
-
-# Enables D-Bus experimental interfaces
-# Possible values: true or false
-#Experimental = false
-
-# Enables kernel experimental features, alternatively a list of UUIDs
-# can be given.
-# Possible values: true,false,<UUID List>
-# Possible UUIDS:
-# d4992530-b9ec-469f-ab01-6c481c47da1c (BlueZ Experimental Debug)
-# 671b10b5-42c0-4696-9227-eb28d1b049d6 (BlueZ Experimental Simultaneous Central and Peripheral)
-# 15c0a148-c273-11ea-b3de-0242ac130004 (BlueZ Experimental LL privacy)
-# 330859bc-7506-492d-9370-9a6f0614037f (BlueZ Experimental Bluetooth Quality Report)
-# a6695ace-ee7f-4fb9-881a-5fac66c629af (BlueZ Experimental Offload Codecs)
-# 6fbaf188-05e0-496a-9885-d6ddfdb4e03e (BlueZ Experimental ISO socket)
-# Defaults to false.
-#KernelExperimental = false
-
-# The duration to avoid retrying to resolve a peer's name, if the previous
-# try failed.
-# The value is in seconds. Default is 300, i.e. 5 minutes.
-#RemoteNameRequestRetryDelay = 300
-
-[BR]
-# The following values are used to load default adapter parameters for BR/EDR.
-# BlueZ loads the values into the kernel before the adapter is powered if the
-# kernel supports the MGMT_LOAD_DEFAULT_PARAMETERS command. If a value isn't
-# provided, the kernel will be initialized to it's default value.  The actual
-# value will vary based on the kernel version and thus aren't provided here.
-# The Bluetooth Core Specification should be consulted for the meaning and valid
-# domain of each of these values.
-
-# BR/EDR Page scan activity configuration
-#PageScanType=
-#PageScanInterval=
-#PageScanWindow=
-
-# BR/EDR Inquiry scan activity configuration
-#InquiryScanType=
-#InquiryScanInterval=
-#InquiryScanWindow=
-
-# BR/EDR Link supervision timeout
-#LinkSupervisionTimeout=
-
-# BR/EDR Page Timeout
-#PageTimeout=
-
-# BR/EDR Sniff Intervals
-#MinSniffInterval=
-#MaxSniffInterval=
-
-[LE]
-# The following values are used to load default adapter parameters for LE.
-# BlueZ loads the values into the kernel before the adapter is powered if the
-# kernel supports the MGMT_LOAD_DEFAULT_PARAMETERS command. If a value isn't
-# provided, the kernel will be initialized to it's default value.  The actual
-# value will vary based on the kernel version and thus aren't provided here.
-# The Bluetooth Core Specification should be consulted for the meaning and valid
-# domain of each of these values.
-# LE advertisement interval (used for legacy advertisement interface only)
-#MinAdvertisementInterval=
-#MaxAdvertisementInterval=
-#MultiAdvertisementRotationInterval=
-
-# LE scanning parameters used for passive scanning supporting auto connect
-# scenarios
-#ScanIntervalAutoConnect=
-#ScanWindowAutoConnect=
-
-# LE scanning parameters used for passive scanning supporting wake from suspend
-# scenarios
-#ScanIntervalSuspend=
-#ScanWindowSuspend=
-
-# LE scanning parameters used for active scanning supporting discovery
-# proceedure
-#ScanIntervalDiscovery=
-#ScanWindowDiscovery=
-
-# LE scanning parameters used for passive scanning supporting the advertisement
-# monitor Apis
-#ScanIntervalAdvMonitor=
-#ScanWindowAdvMonitor=
-
-# LE scanning parameters used for connection establishment.
-#ScanIntervalConnect=
-#ScanWindowConnect=
-
-# LE default connection parameters.  These values are superceeded by any
-# specific values provided via the Load Connection Parameters interface
-#MinConnectionInterval=
-#MaxConnectionInterval=
-#ConnectionLatency=
-#ConnectionSupervisionTimeout=
-#Autoconnecttimeout=
-
-# Scan duration during interleaving scan. Only used when scanning for ADV
-# monitors. The units are msec.
-# Default: 300
-#AdvMonAllowlistScanDuration=
-# Default: 500
-#AdvMonNoFilterScanDuration=
-
-# Enable/Disable Advertisement Monitor interleave scan for power saving.
-# 0: disable
-# 1: enable
-# Defaults to 1
-#EnableAdvMonInterleaveScan=
-
-[GATT]
-# GATT attribute cache.
-# Possible values:
-# always: Always cache attributes even for devices not paired, this is
-# recommended as it is best for interoperability, with more consistent
-# reconnection times and enables proper tracking of notifications for all
-# devices.
-# yes: Only cache attributes of paired devices.
-# no: Never cache attributes
-# Default: always
-#Cache = always
-
-# Minimum required Encryption Key Size for accessing secured characteristics.
-# Possible values: 0 and 7-16. 0 means don't care.
-# Defaults to 0
-#KeySize = 0
-
-# Exchange MTU size.
-# Possible values: 23-517
-# Defaults to 517
-#ExchangeMTU = 517
-
-# Number of ATT channels
-# Possible values: 1-5 (1 disables EATT)
-# Default to 1
-#Channels = 1
-
-[CSIS]
-# SIRK - Set Identification Resolution Key which is common for all the
-# sets. They SIRK key is used to identify its sets. This can be any
-# 128 bit value or a string value (e.g. product name) which is then hashed.
-# Possible Values:
-# 16 byte hexadecimal value: 861FAE703ED681F0C50B34155B6434FB
-# String value: "My Product Name"
-# Defaults to none
-#SIRK =
-
-# SIRK Encryption
-# Possible values:
-# yes: Encrypt SIRK when read
-# no: Do not encrypt SIRK when read. (plaintext)
-# Defaults to yes
-#Encryption = yes
-
-# Total no of sets belongs to this Profile
-# Defaults to 0
-#Size = 0
-
-# Rank for the device
-# Defaults to 0
-#Rank = 0
-
-[AVDTP]
-# AVDTP L2CAP Signalling Channel Mode.
-# Possible values:
-# basic: Use L2CAP Basic Mode
-# ertm: Use L2CAP Enhanced Retransmission Mode
-#SessionMode = basic
-
-# AVDTP L2CAP Transport Channel Mode.
-# Possible values:
-# basic: Use L2CAP Basic Mode
-# streaming: Use L2CAP Streaming Mode
-#StreamMode = basic
-
-[Policy]
-#
-# The ReconnectUUIDs defines the set of remote services that should try
-# to be reconnected to in case of a link loss (link supervision
-# timeout). The policy plugin should contain a sane set of values by
-# default, but this list can be overridden here. By setting the list to
-# empty the reconnection feature gets disabled.
-#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb,0000111f-0000-1000-8000-00805f9b34fb,0000110a-0000-1000-8000-00805f9b34fb,0000110b-0000-1000-8000-00805f9b34fb
-
-# ReconnectAttempts define the number of attempts to reconnect after a link
-# lost. Setting the value to 0 disables reconnecting feature.
-#ReconnectAttempts=7
-
-# ReconnectIntervals define the set of intervals in seconds to use in between
-# attempts.
-# If the number of attempts defined in ReconnectAttempts is bigger than the
-# set of intervals the last interval is repeated until the last attempt.
-#ReconnectIntervals=1,2,4,8,16,32,64
-
-# AutoEnable defines option to enable all controllers when they are found.
-# This includes adapters present on start as well as adapters that are plugged
-# in later on. Defaults to 'true'.
-AutoEnable=false
-
-# Audio devices that were disconnected due to suspend will be reconnected on
-# resume. ResumeDelay determines the delay between when the controller
-# resumes from suspend and a connection attempt is made. A longer delay is
-# better for better co-existence with Wi-Fi.
-# The value is in seconds.
-# Default: 2
-#ResumeDelay = 2
-
-[AdvMon]
-# Default RSSI Sampling Period. This is used when a client registers an
-# advertisement monitor and leaves the RSSISamplingPeriod unset.
-# Possible values:
-# 0x00       Report all advertisements
-# N = 0xXX   Report advertisements every N x 100 msec (range: 0x01 to 0xFE)
-# 0xFF       Report only one advertisement per device during monitoring period
-# Default: 0xFF
-#RSSISamplingPeriod=0xFF