update mpv config

Signed-off-by: Robert Günzler <r@gnzler.io>

8 files changed, 0 insertions, 206 deletions

diff --git a/.config/mvi/script-opts/autoload.conf b/.config/mvi/script-opts/autoload.conf
deleted file mode 100644
index 65feea5..0000000
--- a/.config/mvi/script-opts/autoload.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-disabled=no
-images=yes
-videos=no
-audio=no
diff --git a/.config/mvi/script-opts/detect_image.conf b/.config/mvi/script-opts/detect_image.conf
deleted file mode 100644
index 1ddd9ca..0000000
--- a/.config/mvi/script-opts/detect_image.conf
+++ /dev/null
@@ -1,17 +0,0 @@
-# commands to execute when a file detected as an image (1 frame, no audio) is loaded or unloaded
-
-# an image was loaded, and the previous file was not an image (or there was no previous file)
-command_on_first_image_loaded=
-# an image was loaded (regardless of what the previous file was)
-command_on_image_loaded=
-# a non-image was loaded, and the previous file was an image
-command_on_non_image_loaded=
-
-# the purpose of these "hooks" is to let you change bindings, profiles, reset properties...
-# see https://mpv.io/manual/master/#list-of-input-commands for general command information
-# note that there is no such thing as "unloading a profile", to emulate this you must create an opposite profile and load that
-
-# example possible values:
-#command_on_first_image_loaded=apply-profile image; enable-section image-viewer; script-message enable-status-line
-#command_on_image_loaded=no-osd set video-pan-x 0; script-message align-border "" -1
-#command_on_non_image_loaded=disable-section image-viewer; no-osd set video-pan-x 0; no-osd set video-pan-y 0; no-osd set video-zoom 0; script-message disable-status-line
diff --git a/.config/mvi/script-opts/gallery_worker.conf b/.config/mvi/script-opts/gallery_worker.conf
deleted file mode 100644
index 499d25e..0000000
--- a/.config/mvi/script-opts/gallery_worker.conf
+++ /dev/null
@@ -1,13 +0,0 @@
-# accepts a |-separated list of URL patterns which gallery.lua should thumbnail using youtube-dl.
-# The patterns are matched after the http(s):// part of the URL.
-#^ matches the beginning of the URL, $ matches its end, and you should use % before any of the characters ^$()%|,.[]*+-? to match that character.
-#
-#Examples
-#  will exclude any URL that starts with http://youtube.com or https://youtube.com:
-#     ytdl_exclude=^youtube%.com
-#  will exclude any URL that ends with .mkv or .mp4:
-#     ytdl_exclude=%.mkv$|%.mp4$
-#  See more lua patterns here: https://www.lua.org/manual/5.1/manual.html#5.4.1
-#
-#See also: ytdl_hook-exclude in mpv's manpage.
-ytdl_exclude=
diff --git a/.config/mvi/script-opts/image_positioning.conf b/.config/mvi/script-opts/image_positioning.conf
deleted file mode 100644
index 5b72fb9..0000000
--- a/.config/mvi/script-opts/image_positioning.conf
+++ /dev/null
@@ -1,8 +0,0 @@
-# size of the margins with drag-to-pan
-drag_to_pan_margin=50
-drag_to_pan_move_if_full_view=no
-
-# size of the margins with pan-follows-cursor
-pan_follows_cursor_margin=50
-# whether pan-follows-cursor should pan when the entire image is visible
-pan_follows_cursor_move_if_full_view=no
diff --git a/.config/mvi/script-opts/minimap.conf b/.config/mvi/script-opts/minimap.conf
deleted file mode 100644
index 72a05ea..0000000
--- a/.config/mvi/script-opts/minimap.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-# whether to show by default
-enabled=yes
-# the position of the center of the minimap, in percentage of the window (x, y)
-center=92,92
-# the scale of the minimap (i.e. the view rectangle is scale / 100 times the size of the window)
-scale=12
-# the cutoff size of the minimap (i.e. the image rectangle is clipped if it falls outside of the this zone)
-max_size=16,16
-# opacity of the "image" (from 00=opaque to FF=transparent)
-image_opacity=88
-# color of the "image" (#BBGGRR where each component rages from 00 to FF)
-image_color=BBBBBB
-# opacity of the "view"
-view_opacity=BB
-view_color=222222
-# whether the view should be drawn above the image
-view_above_image=yes
-# whether to show the minimap if the current image is fully visible
-hide_when_full_image_in_view=yes
diff --git a/.config/mvi/script-opts/playlist_view.conf b/.config/mvi/script-opts/playlist_view.conf
deleted file mode 100644
index e5942b7..0000000
--- a/.config/mvi/script-opts/playlist_view.conf
+++ /dev/null
@@ -1,113 +0,0 @@
-# thumbnail directory in which to create and look for thumbnails
-# on Unix-like platforms:
-#thumbs_dir=~/.mpv_thumbs_dir
-thumbs_dir=~/.mpv-thumbs
-# on Windows:
-#thumbs_dir=%APPDATA%\mpv\gallery-thumbs-dir
-# note that not all env vars get expanded, only '~' and 'APPDATA' do
-
-# use mpv instead of ffmpeg for thumbnail generation
-# slightly slower and does not support transparency, but does not require additional ffmpeg/ffprobe executables
-# yes on Windows, no on other plateforms
-#generate_thumbnails_with_mpv=no
-
-# all options below are platform-independent
-
-# fine-grained controls for the geometry of the gallery
-# each option can have a fixed value, or dynamic by using the following variables:
-# ww, wh: mpv window width, mpv window height (always available)
-# gx, gy: gallery horizontal position, gallery vertical position
-# gw, gh: gallery width, gallery height
-# sw, sh: minimum spacing width, minimum spacing height
-# tw, th: thumbnail width, thumbnail height
-# these strings are interpreted using the lua equivalent of "eval" so math functions and logical conditions can be used
-# if an option references variables, they will be computed in the appropriate order
-# (for example, if gallery_width == 5 * thumbnail_width, thumbnail_size will be computed before gallery_size)
-# in case of cyclical dependencies, the script will abort
-# example
-# -------
-# make the gallery centered
-gallery_position={ (ww - gw) / 2, (wh - gh) / 2 }
-# make the gallery's size 9/10 the size of the window
-gallery_size={ 10 * ww / 10, 10 * wh / 10 }
-# with at least 15 pixels of spacing between each thumbnail
-min_spacing={ 5, 5 }
-# and two thumbnail size presets for Windows smaller/bigger than 1366 x 768
-thumbnail_size=(ww * wh <= 1366 * 768) and {192, 108} or {288, 162}
-# it is recommended to use discrete increments for thumbnail_size since a new thumbnail needs to be generated for each size
-
-# limit the number of thumbnails visible, even if more could be shown
-# 64 is the maximum due to limitations in mpv
-max_thumbnails=64
-
-# the position in the file at which to take the thumbnail
-# can either be a percentage of the video duration, or a number of seconds
-take_thumbnail_at=20%
-
-# load to the selected video when the playlist-view is toggled off
-load_file_on_toggle_off=no
-# close the playlist-view when loading a video
-close_on_load_file=yes
-# pause the current video when the playlist-view is opened
-pause_on_start=yes
-# resume the current video when the playlist-view is closed
-# can be yes, no, or only-if-did-pause
-# in the latter case, will only resume if the video was actually paused by opening the playlist-view
-resume_on_stop=only-if-did-pause
-# automatically start the playlist-view when mpv is started
-start_on_mpv_startup=no
-# automatically start the playlist-view when the current file is finished
-# only has an effect when keep-open=always
-start_on_file_end=yes
-# if the currently playing file changes, set the selection to the new one
-follow_playlist_position=yes
-# when loading a file, remember the time-position of the previous
-# and restart from there if it's loaded again
-remember_time_position=yes
-
-# show the filename below each thumbnail
-show_text=yes
-# use the playlist title if it exists instead of the filename
-show_title=yes
-strip_directory=yes
-strip_extension=yes
-text_size=24
-
-# colors are defined in hexadecimal in Blue Green Red (BGR) order
-# opacity is defined between 00 (opaque) and FF (transparent)
-background_color=333333
-background_opacity=33
-background_roundness=0
-normal_border_color=BBBBBB
-normal_border_size=0.5
-selected_border_color=DDDDDD
-selected_border_size=2
-flagged_border_color=AF5C00
-flagged_border_size=4
-selected_flagged_border_color=6F340B
-placeholder_color=222222
-
-# arbitrary commands that are run when the playlist-view is opened/closed
-# this can be used for lowering video settings when the gallery is active, since
-# high-quality video settings can result in slowdown of the gallery
-command_on_open=
-command_on_close=
-
-# the path of the 'flags' file that is written when you exit mpv
-flagged_file_path=./mpv_gallery_flagged
-
-mouse_support=yes
-UP=k
-DOWN=j
-LEFT=h
-RIGHT=l
-PAGE_UP=PGUP
-PAGE_DOWN=PGDWN
-FIRST=HOME
-LAST=END
-RANDOM=r
-ACCEPT=ENTER
-CANCEL=ESC
-# this only removes entries from the playlist, not the underlying file
-REMOVE=DEL
-FLAG=SPACE
diff --git a/.config/mvi/script-opts/ruler.conf b/.config/mvi/script-opts/ruler.conf
deleted file mode 100644
index 5e6f48d..0000000
--- a/.config/mvi/script-opts/ruler.conf
+++ /dev/null
@@ -1,21 +0,0 @@
-# whether to show the length of the lines between the two points
-show_distance=yes
-# whether to show the coordinates of the two points
-show_coordinates=yes
-# the coordinate space of the text shown. Can be "image", "window", "both"
-coordinates_space=image
-# can be "degrees", "radians", "both", or "no"
-show_angles=degrees
-line_width=2
-dots_radius=3
-font_size=36
-# ranges from 00 (black) to FF (white)
-line_color=33
-# bindings used to set points. The binding to trigger ruler mode can also be used. Comma-separated list
-confirm_bindings=MBTN_LEFT,ENTER
-# bindings used to set points. The binding to trigger ruler mode can also be used. Comma-separated list
-exit_bindings=ESC
-# if yes, the first point will be immediately set at the cursor position when calling 'ruler'
-set_first_point_on_begin=no
-# if yes, the ruler overlay will be immediately cleared when setting the second point
-clear_on_second_point_set=no
diff --git a/.config/mvi/script-opts/status_line.conf b/.config/mvi/script-opts/status_line.conf
deleted file mode 100644
index 2245494..0000000
--- a/.config/mvi/script-opts/status_line.conf
+++ /dev/null
@@ -1,11 +0,0 @@
-# whether to show by default
-enabled=yes
-# its position, possible values: (bottom|top)-(left|right)
-position=bottom-left
-# its font size
-size=36
-# the text to be expanded
-# see property expansion: https://mpv.io/manual/master/#property-expansion
-# \N can be used for line breaks
-# you can also use ass tags, see here: http://docs.aegisub.org/3.2/ASS_Tags/
-text=${filename} [${playlist-pos-1}/${playlist-count}]