start new

Signed-off-by: Robert Günzler <r@gnzler.io>

15 files changed, 0 insertions, 1441 deletions

diff --git a/.config/mpv/mvi/input.conf b/.config/mpv/mvi/input.conf
deleted file mode 100644
index 1d5b989..0000000
--- a/.config/mpv/mvi/input.conf
+++ /dev/null
@@ -1,109 +0,0 @@
-1 change-list script-opts append image_positioning-drag_to_pan_margin=200
-2 change-list script-opts append ruler-exit_bindings=8
-3 change-list script-opts append ruler-line_color=FF
-4 change-list script-opts append ruler-scale=25
-5 change-list script-opts append ruler-max_size=20,20
-
-SPACE repeatable playlist-next
-alt+SPACE repeatable playlist-prev
-
-# familiar binds
-n playlist-next
-p playlist-prev
-
-UP ignore
-DOWN ignore
-LEFT repeatable playlist-prev
-RIGHT repeatable playlist-next
-
-# simple reminder of default bindings
-#1 add contrast -1
-#2 add contrast 1
-#3 add brightness -1
-#4 add brightness 1
-#5 add gamma -1
-#6 add gamma 1
-#7 add saturation -1
-#8 add saturation 1
-
-# mouse-centric bindings
-MBTN_RIGHT script-binding drag-to-pan
-MBTN_LEFT  script-binding pan-follows-cursor
-MBTN_LEFT_DBL ignore
-WHEEL_UP   script-message cursor-centric-zoom 0.1
-WHEEL_DOWN script-message cursor-centric-zoom -0.1
-
-# panning with the keyboard:
-# pan-image takes the following arguments
-# pan-image AXIS AMOUNT ZOOM_INVARIANT IMAGE_CONSTRAINED
-#            ^            ^                  ^
-#          x or y         |                  |
-#                         |                  |
-#   if yes, will pan by the same         if yes, stops panning if the image
-#     amount regardless of zoom             would go outside of the window
-
-ctrl+down  repeatable script-message pan-image y -0.1 yes yes
-ctrl+up    repeatable script-message pan-image y +0.1 yes yes
-ctrl+right repeatable script-message pan-image x -0.1 yes yes
-ctrl+left  repeatable script-message pan-image x +0.1 yes yes
-
-# now with more precision
-alt+down   repeatable script-message pan-image y -0.01 yes yes
-alt+up     repeatable script-message pan-image y +0.01 yes yes
-alt+right  repeatable script-message pan-image x -0.01 yes yes
-alt+left   repeatable script-message pan-image x +0.01 yes yes
-
-# replace at will with h,j,k,l if you prefer vim-style bindings
-
-# on a trackpad you may want to use these
-#WHEEL_UP    repeatable script-message pan-image y -0.02 yes yes
-#WHEEL_DOWN  repeatable script-message pan-image y +0.02 yes yes
-#WHEEL_LEFT  repeatable script-message pan-image x -0.02 yes yes
-#WHEEL_RIGHT repeatable script-message pan-image x +0.02 yes yes
-
-# align the border of the image to the border of the window
-# align-border takes the following arguments:
-# align-border ALIGN_X ALIGN_Y
-# any value for ALIGN_* is accepted, -1 and 1 map to the border of the window
-ctrl+shift+right script-message align-border -1 ""
-ctrl+shift+left  script-message align-border 1 ""
-ctrl+shift+down  script-message align-border "" -1
-ctrl+shift+up    script-message align-border "" 1
-
-# reset the image
-ctrl+0  no-osd set video-pan-x 0; no-osd set video-pan-y 0; no-osd set video-zoom 0
-
-+ add video-zoom 0.5
-- add video-zoom -0.5; script-message reset-pan-if-visible
-= no-osd set video-zoom 0; script-message reset-pan-if-visible
-
-e script-message equalizer-toggle
-alt+e script-message equalizer-reset
-
-h no-osd vf toggle hflip; show-text "Horizontal flip"
-v no-osd vf toggle vflip; show-text "Vertical flip"
-
-r script-message rotate-video 90; show-text "Clockwise rotation"
-R script-message rotate-video -90; show-text "Counter-clockwise rotation"
-alt+r no-osd set video-rotate 0; show-text "Reset rotation"
-
-d script-message ruler
-
-# Toggling between pixel-exact reproduction and interpolation
-a cycle-values scale nearest ewa_lanczossharp
-
-# Toggle color management on or off
-c cycle icc-profile-auto
-
-# Screenshot of the window output
-S screenshot window
-
-# Toggle aspect ratio information on and off
-A cycle-values video-aspect-override "-1" "no"
-
-P script-message force-print-filename
-
-# ADVANCED: you can define bindings that belong to a "section" (named "image-viewer" here) like so:
-#alt+SPACE {image-viewer} repeatable playlist-prev
-#SPACE     {image-viewer} repeatable playlist-next
-# to load them conditionally with a command. See scripts-opts/image_viewer.conf for how you can do this
diff --git a/.config/mpv/mvi/mpv.conf b/.config/mpv/mvi/mpv.conf
deleted file mode 100644
index 973ba42..0000000
--- a/.config/mpv/mvi/mpv.conf
+++ /dev/null
@@ -1,49 +0,0 @@
-## IMAGE
-# classic opengl-hq parameter, change at will
-scale=spline36
-cscale=spline36
-dscale=mitchell
-dither-depth=auto
-correct-downscaling
-sigmoid-upscaling
-# debanding seems rarely useful with images
-#deband
-# dark grey background instead of pure black
-background=color
-background-color=0.2
-
-## MISC
-mute=yes
-# the osc is mostly useful for videos
-osc=no
-# don't try to autoload subtitles or audio files
-sub-auto=no
-audio-file-auto=no
-# get rid of the useless V: 00:00:00 / 00:00:00 line
-term-status-msg=
-
-# replace mpv with mvi in the window title
-title="${?media-title:${media-title}}${!media-title:No file} - mvi"
-
-# don't slideshow by default
-image-display-duration=inf
-# loop files in case of webms or gifs
-loop-file=inf
-# and loop the whole playlist
-loop-playlist=inf
-
-# you need this if you plan to use drag-to-pan or pan-follows-cursor with MOUSE_LEFT 
-window-dragging=no
-
-#according to haasn, aspect ratio info for PNG and JPG is "universally bust"
-[extension.png]
-video-aspect-override=no
-
-[extension.jpg]
-video-aspect-override=no
-
-[extension.jpeg]
-profile=extension.jpg
-
-[silent]
-msg-level=all=no
diff --git a/.config/mpv/mvi/script-opts/detect_image.conf b/.config/mpv/mvi/script-opts/detect_image.conf
deleted file mode 100644
index 586fb95..0000000
--- a/.config/mpv/mvi/script-opts/detect_image.conf
+++ /dev/null
@@ -1,17 +0,0 @@
-# commands to execute when a file detected as an image (1 frame, no audio) is loaded or unloaded
-
-# an image was loaded, and the previous file was not an image (or there was no previous file)
-command_on_first_image_loaded=
-# an image was loaded (regardless of what the previous file was)
-command_on_image_loaded=
-# a non-image was loaded, and the previous file was an image
-command_on_non_image_loaded=
-
-# the purpose of these "hooks" is to let you change bindings, profiles, reset properties...
-# see https://mpv.io/manual/master/#list-of-input-commands for general command information
-# note that there is no such thing as "unloading a profile", to emulate this you must create an opposite profile and load that
-
-# example possible values:
-#command_on_first_image_loaded=apply-profile image; enable-section image-viewer; script-message status-line-enable
-#command_on_image_loaded=no-osd set video-pan-x 0; script-message align-border "" -1
-#command_on_non_image_loaded=disable-section image-viewer; no-osd set video-pan-x 0; no-osd set video-pan-y 0; no-osd set video-zoom 0; script-message status-line-disable
diff --git a/.config/mpv/mvi/script-opts/image_positioning.conf b/.config/mpv/mvi/script-opts/image_positioning.conf
deleted file mode 100644
index 998ec64..0000000
--- a/.config/mpv/mvi/script-opts/image_positioning.conf
+++ /dev/null
@@ -1,14 +0,0 @@
-# size of the margins with drag-to-pan
-drag_to_pan_margin=50
-drag_to_pan_move_if_full_view=no
-
-# size of the margins with pan-follows-cursor
-pan_follows_cursor_margin=50
-
-# size of the margins with cursor-centric-zoom
-cursor_centric_zoom_margin=50
-# if the borders would show up, move the image 
-# this makes it not exactly cursor-centric in some cases
-cursor_centric_zoom_auto_center=yes
-# allow zooming out if the image can already fully fit in the window
-cursor_centric_zoom_dezoom_if_full_view=no
diff --git a/.config/mpv/mvi/script-opts/minimap.conf b/.config/mpv/mvi/script-opts/minimap.conf
deleted file mode 100644
index 72a05ea..0000000
--- a/.config/mpv/mvi/script-opts/minimap.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-# whether to show by default
-enabled=yes
-# the position of the center of the minimap, in percentage of the window (x, y)
-center=92,92
-# the scale of the minimap (i.e. the view rectangle is scale / 100 times the size of the window)
-scale=12
-# the cutoff size of the minimap (i.e. the image rectangle is clipped if it falls outside of the this zone)
-max_size=16,16
-# opacity of the "image" (from 00=opaque to FF=transparent)
-image_opacity=88
-# color of the "image" (#BBGGRR where each component rages from 00 to FF)
-image_color=BBBBBB
-# opacity of the "view"
-view_opacity=BB
-view_color=222222
-# whether the view should be drawn above the image
-view_above_image=yes
-# whether to show the minimap if the current image is fully visible
-hide_when_full_image_in_view=yes
diff --git a/.config/mpv/mvi/script-opts/ruler.conf b/.config/mpv/mvi/script-opts/ruler.conf
deleted file mode 100644
index 5e6f48d..0000000
--- a/.config/mpv/mvi/script-opts/ruler.conf
+++ /dev/null
@@ -1,21 +0,0 @@
-# whether to show the length of the lines between the two points
-show_distance=yes
-# whether to show the coordinates of the two points
-show_coordinates=yes
-# the coordinate space of the text shown. Can be "image", "window", "both"
-coordinates_space=image
-# can be "degrees", "radians", "both", or "no"
-show_angles=degrees
-line_width=2
-dots_radius=3
-font_size=36
-# ranges from 00 (black) to FF (white)
-line_color=33
-# bindings used to set points. The binding to trigger ruler mode can also be used. Comma-separated list
-confirm_bindings=MBTN_LEFT,ENTER
-# bindings used to set points. The binding to trigger ruler mode can also be used. Comma-separated list
-exit_bindings=ESC
-# if yes, the first point will be immediately set at the cursor position when calling 'ruler'
-set_first_point_on_begin=no
-# if yes, the ruler overlay will be immediately cleared when setting the second point
-clear_on_second_point_set=no
diff --git a/.config/mpv/mvi/script-opts/status_line.conf b/.config/mpv/mvi/script-opts/status_line.conf
deleted file mode 100644
index ec15108..0000000
--- a/.config/mpv/mvi/script-opts/status_line.conf
+++ /dev/null
@@ -1,14 +0,0 @@
-# whether to show by default
-enabled=yes
-# its font size
-size=36
-# distance of the text to the borders
-margin=10
-# the text to be expanded
-# see property expansion: https://mpv.io/manual/master/#property-expansion
-# \N can be used for line breaks
-# you can also use ass tags, see here: http://docs.aegisub.org/3.2/ASS_Tags/
-text_top_left=
-text_top_right=
-text_bottom_left=${filename} [${playlist-pos-1}/${playlist-count}]
-text_bottom_right=[${dwidth:X}x${dheight:X}]
diff --git a/.config/mpv/mvi/scripts/detect-image.lua b/.config/mpv/mvi/scripts/detect-image.lua
deleted file mode 100644
index bfe52c2..0000000
--- a/.config/mpv/mvi/scripts/detect-image.lua
+++ /dev/null
@@ -1,73 +0,0 @@
-local opts = {
-    command_on_first_image_loaded="",
-    command_on_image_loaded="",
-    command_on_non_image_loaded="",
-}
-local options = require 'mp.options'
-local msg = require 'mp.msg'
-
-options.read_options(opts, nil, function() end)
-
-function run_maybe(str)
-    if str ~= "" then
-        mp.command(str)
-    end
-end
-
-local was_image = false
-
-function set_image(is_image)
-    if is_image and not was_image then
-        msg.info("First image detected")
-        run_maybe(opts.command_on_first_image_loaded)
-    end
-    if is_image then
-        msg.info("Image detected")
-        run_maybe(opts.command_on_image_loaded)
-    end
-    if not is_image and was_image then
-        msg.info("Non-image detected")
-        run_maybe(opts.command_on_non_image_loaded)
-    end
-    was_image = is_image
-end
-
-local properties = {}
-
-function properties_changed()
-    local dwidth = properties["dwidth"]
-    local tracks = properties["track-list"]
-    local path = properties["path"]
-    local framecount = properties["estimated-frame-count"]
-
-    if not path or path == "" then return end
-    if not tracks or #tracks == 0 then return end
-    local audio_tracks = 0
-    for _, track in ipairs(tracks) do
-        if track.type == "audio" then
-            audio_tracks = audio_tracks + 1
-        end
-    end
-
-    -- only do things when state is consistent
-    if not framecount and audio_tracks > 0 then
-        set_image(false)
-    elseif framecount and dwidth and dwidth > 0 then
-        -- png have 0 frames, jpg 1 ¯\_(ツ)_/¯
-        set_image((framecount == 0 or framecount == 1) and audio_tracks == 0)
-    end
-end
-
-function observe(propname)
-    mp.observe_property(propname, "native", function(_, val)
-        if val ~= properties[propname] then
-            properties[propname] = val
-            msg.verbose("Property " .. propname .. " changed")
-            properties_changed()
-        end
-    end)
-end
-observe("estimated-frame-count")
-observe("track-list")
-observe("dwidth")
-observe("path")
diff --git a/.config/mpv/mvi/scripts/equalizer.lua b/.config/mpv/mvi/scripts/equalizer.lua
deleted file mode 100644
index f7a50ab..0000000
--- a/.config/mpv/mvi/scripts/equalizer.lua
+++ /dev/null
@@ -1,176 +0,0 @@
-local opts = {
-    bars = 'brightness,contrast,gamma,saturation,hue',
-    draw_icons = true,
-}
-
-local msg = require 'mp.msg'
-local assdraw = require 'mp.assdraw'
-local options = require 'mp.options'
-local utils = require 'mp.utils'
-
-options.read_options(opts, nil, function(c)
-end)
-
-local enabled = false
-local active_bars = {}
-local bar_being_dragged = nil
-local stale = false
-
-function split_comma(input)
-    local ret = {}
-    for str in string.gmatch(input, "([^,]+)") do
-        ret[#ret + 1] = str
-    end
-    return ret
-end
-
-function get_position_normalized(x, y, bar)
-    return (x - bar.x) / bar.w, (y - bar.y) / bar.h
-end
-
-function handle_mouse_move()
-    if not bar_being_dragged then return end
-    local bar = bar_being_dragged
-    local mx, my = mp.get_mouse_pos()
-    local nx, _ = get_position_normalized(mx, my, bar)
-    nx = math.max(0, math.min(nx, 1))
-    local val = math.floor(nx * (bar.max_value - bar.min_value) + bar.min_value + 0.5)
-    mp.set_property_number(bar.property, val)
-    -- the observe_property call will take care of setting the value
-end
-
-function handle_mouse_left(table)
-    if table["event"] == "down" then
-        local mx, my = mp.get_mouse_pos()
-        for _, bar in ipairs(active_bars) do
-            local nx, ny = get_position_normalized(mx, my, bar)
-            if nx >= 0 and ny >= 0 and nx <= 1 and ny <= 1 then
-                bar_being_dragged = bar
-                local val = math.floor(nx * (bar.max_value - bar.min_value) + bar.min_value + 0.5)
-                mp.set_property_number(bar.property, val)
-                mp.add_forced_key_binding("mouse_move", "mouse_move", handle_mouse_move)
-                break
-            end
-        end
-    elseif table["event"] == "up" then
-        mp.remove_key_binding("mouse_move")
-        bar_being_dragged = nil
-    end
-end
-
-function property_changed(prop, val)
-    for _, bar in ipairs(active_bars) do
-        if bar.property == prop then
-            bar.value = val
-            stale = true
-            break
-        end
-    end
-end
-
-function idle_handler()
-    if not stale then return end
-    stale = false
-    local a = assdraw.ass_new()
-    a:new_event()
-    a:append(string.format('{\\an0\\bord2\\shad0\\1a&00&\\1c&%s&}', '888888'))
-    a:pos(0, 0)
-    a:draw_start()
-    for _, bar in ipairs(active_bars) do
-        a:rect_cw(bar.x, bar.y, bar.x + bar.w, bar.y + bar.h)
-    end
-    a:new_event()
-    a:append(string.format('{\\an0\\bord2\\shad0\\1a&00&\\1c&%s&}', 'dddddd'))
-    a:pos(0, 0)
-    a:draw_start()
-    for _, bar in ipairs(active_bars) do
-        if bar.value > bar.min_value then
-            local val_norm = (bar.value - bar.min_value) / (bar.max_value - bar.min_value)
-            a:rect_cw(bar.x, bar.y, bar.x + val_norm * bar.w, bar.y + bar.h)
-        end
-    end
-    for _, bar in ipairs(active_bars) do
-        a:new_event()
-        a:append("{\\an6\\fs40\\bord2}")
-        a:pos(bar.x - 8, bar.y + bar.h/2 - 2)
-        a:append(bar.property:sub(1,1):upper() .. bar.property:sub(2,-1))
-    end
-    local ww, wh = mp.get_osd_size()
-    mp.set_osd_ass(ww, wh, a.text)
-end
-
-function fix_position()
-    local ww, wh = mp.get_osd_size()
-    for i, bar in ipairs(active_bars) do
-        bar.x = ww / 5
-        bar.y = wh / 2 + i * 50
-        bar.w = ww - 2 * (ww / 5)
-        bar.h = 30
-    end
-end
-
-function dimensions_changed()
-    stale = true
-    fix_position()
-end
-
-function enable()
-    if enabled then return end
-    enabled = true
-    mp.add_forced_key_binding("MBTN_LEFT", "mouse_left", handle_mouse_left, {complex=true})
-    for i, prop in ipairs(split_comma(opts.bars)) do
-        local prop_info = mp.get_property_native("option-info/" .. prop)
-        if not prop_info then
-            msg.warn("Property \'" .. prop .. "\' does not exist")
-        elseif not prop_info.type == 'Integer' then
-            msg.warn("Property \'" .. prop .. "\' is not an integer")
-        else
-            mp.observe_property(prop, 'native', property_changed)
-            active_bars[#active_bars + 1] = {
-                property = prop,
-                value = mp.get_property_number(prop),
-                min_value = prop_info.min,
-                max_value = prop_info.max,
-            }
-        end
-    end
-    stale = true
-    fix_position()
-    mp.observe_property("osd-dimensions", "native", dimensions_changed)
-    mp.register_idle(idle_handler)
-end
-
-function disable()
-    if not enabled then return end
-    enabled = false
-    active_bars = {}
-    bar_being_dragged = nil
-    mp.remove_key_binding("mouse_left")
-    mp.remove_key_binding("mouse_move")
-    mp.unobserve_property(property_changed)
-    mp.unobserve_property(dimensions_changed)
-    mp.unregister_idle(idle_handler)
-    mp.set_osd_ass(1280, 720, "")
-end
-
-function toggle()
-    if enabled then
-        disable()
-    else
-        enable()
-    end
-end
-
-function reset()
-    for _, prop in ipairs(split_comma(opts.bars)) do
-        local prop_info = mp.get_property_native("option-info/" .. prop)
-        if prop_info and prop_info["default-value"] then
-            mp.set_property(prop_info["name"], prop_info["default-value"])
-        end
-    end
-end
-
-mp.add_key_binding(nil, "equalizer-enable", enable)
-mp.add_key_binding(nil, "equalizer-disable", disable)
-mp.add_key_binding(nil, "equalizer-toggle", toggle)
-mp.add_key_binding(nil, "equalizer-reset", reset)
diff --git a/.config/mpv/mvi/scripts/freeze-window.lua b/.config/mpv/mvi/scripts/freeze-window.lua
deleted file mode 100644
index 693c717..0000000
--- a/.config/mpv/mvi/scripts/freeze-window.lua
+++ /dev/null
@@ -1,14 +0,0 @@
--- credit to TheAMM
-
-local size_changed = false
-
-mp.register_idle(function()
-    if not size_changed then return end
-    local ww, wh = mp.get_osd_size()
-    if not ww or ww <= 0 or not wh or wh <= 0 then return end
-    mp.set_property("geometry", string.format("%dx%d", ww, wh))
-    size_changed = false
-end)
-
-mp.observe_property("osd-width", "native", function() size_changed = true end)
-mp.observe_property("osd-height", "native", function() size_changed = true end)
diff --git a/.config/mpv/mvi/scripts/image-positioning.lua b/.config/mpv/mvi/scripts/image-positioning.lua
deleted file mode 100644
index c0036d9..0000000
--- a/.config/mpv/mvi/scripts/image-positioning.lua
+++ /dev/null
@@ -1,277 +0,0 @@
-local opts = {
-    drag_to_pan_margin = 50,
-    drag_to_pan_move_if_full_view=false,
-
-    pan_follows_cursor_margin = 50,
-
-    cursor_centric_zoom_margin = 50,
-    cursor_centric_zoom_auto_center = true,
-    cursor_centric_zoom_dezoom_if_full_view = false,
-}
-local options = require 'mp.options'
-local msg = require 'mp.msg'
-local assdraw = require 'mp.assdraw'
-
-options.read_options(opts, nil, function() end)
-
-function clamp(value, low, high)
-    if value <= low then
-        return low
-    elseif value >= high then
-        return high
-    else
-        return value
-    end
-end
-
-
-local cleanup = nil -- function set up by drag-to-pan/pan-follows cursor and must be called to clean lingering state
-
-function drag_to_pan_handler(table)
-    if cleanup then
-        cleanup()
-        cleanup = nil
-    end
-    if table["event"] == "down" then
-        local dim = mp.get_property_native("osd-dimensions")
-        if not dim then return end
-        local mouse_pos_origin, video_pan_origin = {}, {}
-        local moved = false
-        mouse_pos_origin[1], mouse_pos_origin[2] = mp.get_mouse_pos()
-        video_pan_origin[1] = mp.get_property_number("video-pan-x")
-        video_pan_origin[2] = mp.get_property_number("video-pan-y")
-        local video_size = { dim.w - dim.ml - dim.mr, dim.h - dim.mt - dim.mb }
-        local margin = opts.drag_to_pan_margin
-        local move_up = true
-        local move_lateral = true
-        if not opts.drag_to_pan_move_if_full_view then
-            if dim.ml >= 0 and dim.mr >= 0 then
-                move_lateral = false
-            end
-            if dim.mt >= 0 and dim.mb >= 0 then
-                move_up = false
-            end
-        end
-        if not move_up and not move_lateral then return end
-        local idle = function()
-            if moved then
-                local mX, mY = mp.get_mouse_pos()
-                local pX = video_pan_origin[1]
-                local pY = video_pan_origin[2]
-                if move_lateral then
-                    pX = video_pan_origin[1] + (mX - mouse_pos_origin[1]) / video_size[1]
-                    if 2 * margin > dim.ml + dim.mr then
-                        pX = clamp(pX,
-                            (-margin + dim.w / 2) / video_size[1] - 0.5,
-                            (margin - dim.w / 2) / video_size[1] + 0.5)
-                    else
-                        pX = clamp(pX,
-                            (margin - dim.w / 2) / video_size[1] + 0.5,
-                            (-margin + dim.w / 2) / video_size[1] - 0.5)
-                    end
-                end
-                if move_up then
-                    pY = video_pan_origin[2] + (mY - mouse_pos_origin[2]) / video_size[2]
-                    if 2 * margin > dim.mt + dim.mb then
-                        pY = clamp(pY,
-                            (-margin + dim.h / 2) / video_size[2] - 0.5,
-                            (margin - dim.h / 2) / video_size[2] + 0.5)
-                    else
-                        pY = clamp(pY,
-                            (margin - dim.h / 2) / video_size[2] + 0.5,
-                            (-margin + dim.h / 2) / video_size[2] - 0.5)
-                    end
-                end
-                mp.command("no-osd set video-pan-x " .. clamp(pX, -3, 3) .. "; no-osd set video-pan-y " .. clamp(pY, -3, 3))
-                moved = false
-            end
-        end
-        mp.register_idle(idle)
-        mp.add_forced_key_binding("mouse_move", "image-viewer-mouse-move", function() moved = true end)
-        cleanup = function()
-            mp.remove_key_binding("image-viewer-mouse-move")
-            mp.unregister_idle(idle)
-        end
-    end
-end
-
-function pan_follows_cursor_handler(table)
-    if cleanup then
-        cleanup()
-        cleanup = nil
-    end
-    if table["event"] == "down" then
-        local dim = mp.get_property_native("osd-dimensions")
-        if not dim then return end
-        local video_size = { dim.w - dim.ml - dim.mr, dim.h - dim.mt - dim.mb }
-        local moved = true
-        local idle = function()
-            if moved then
-                local mX, mY = mp.get_mouse_pos()
-                local x = math.min(1, math.max(- 2 * mX / dim.w + 1, -1))
-                local y = math.min(1, math.max(- 2 * mY / dim.h + 1, -1))
-                local command = ""
-                local margin = opts.pan_follows_cursor_margin
-                if dim.ml + dim.mr < 0 then
-                    command = command .. "no-osd set video-pan-x " .. clamp(x * (2 * margin - dim.ml - dim.mr) / (2 * video_size[1]), -3, 3) .. ";"
-                elseif mp.get_property_number("video-pan-x") ~= 0 then
-                    command = command .. "no-osd set video-pan-x " .. "0;"
-                end
-                if dim.mt + dim.mb < 0 then
-                    command = command .. "no-osd set video-pan-y " .. clamp(y * (2 * margin - dim.mt - dim.mb) / (2 * video_size[2]), -3, 3) .. ";"
-                elseif mp.get_property_number("video-pan-y") ~= 0 then
-                    command = command .. "no-osd set video-pan-y " .. "0;"
-                end
-                if command ~= "" then
-                    mp.command(command)
-                end
-                moved = false
-            end
-        end
-        mp.register_idle(idle)
-        mp.add_forced_key_binding("mouse_move", "image-viewer-mouse-move", function() moved = true end)
-        cleanup = function()
-            mp.remove_key_binding("image-viewer-mouse-move")
-            mp.unregister_idle(idle)
-        end
-    end
-end
-
-function cursor_centric_zoom_handler(amt)
-    local zoom_inc = tonumber(amt)
-    if not zoom_inc or zoom_inc == 0 then return end
-    local dim = mp.get_property_native("osd-dimensions")
-    if not dim then return end
-
-    local margin = opts.cursor_centric_zoom_margin
-
-    local video_size = { dim.w - dim.ml - dim.mr, dim.h - dim.mt - dim.mb }
-
-    -- the size in pixels of the (in|de)crement
-    local diff_width  = (2 ^ zoom_inc - 1) * video_size[1]
-    local diff_height = (2 ^ zoom_inc - 1) * video_size[2]
-    if not opts.cursor_centric_zoom_dezoom_if_full_view and
-        zoom_inc < 0 and
-        video_size[1] + diff_width + 2 * margin <= dim.w and
-        video_size[2] + diff_height + 2 * margin <= dim.h
-    then
-        -- the zoom decrement is too much, reduce it such that the full image is visible, no more, no less
-        -- in addition, this should take care of trying too zoom out while everything is already visible
-        local new_zoom_inc_x = math.log((dim.w - 2 * margin) / video_size[1]) / math.log(2)
-        local new_zoom_inc_y = math.log((dim.h - 2 * margin) / video_size[2]) / math.log(2)
-        local new_zoom_inc = math.min(0, math.min(new_zoom_inc_x, new_zoom_inc_y))
-        zoom_inc = new_zoom_inc
-        diff_width  = (2 ^ zoom_inc - 1) * video_size[1]
-        diff_height = (2 ^ zoom_inc - 1) * video_size[2]
-    end
-    local new_width = video_size[1] + diff_width
-    local new_height = video_size[2] + diff_height
-
-    local mouse_pos_origin = {}
-    mouse_pos_origin[1], mouse_pos_origin[2] = mp.get_mouse_pos()
-    local new_pan_x, new_pan_y
-
-    -- some additional constraints:
-    -- if image can be fully visible (in either direction), set pan to 0
-    -- if border would show on either side, then prefer adjusting the pan even if not cursor-centric
-    local auto_c = opts.cursor_centric_zoom_auto_center
-    if auto_c and new_width <= dim.w then
-        new_pan_x = 0
-    else
-        local pan_x = mp.get_property("video-pan-x")
-        local rx = (dim.ml + video_size[1] / 2 - mouse_pos_origin[1]) / (video_size[1] / 2)
-        new_pan_x = (pan_x * video_size[1] + rx * diff_width / 2) / new_width
-        if auto_c then
-            new_pan_x = clamp(new_pan_x, (dim.w - 2 * margin) / (2 * new_width) - 0.5, - (dim.w - 2 * margin) / (2 * new_width) + 0.5)
-        end
-    end
-
-    if auto_c and new_height <= dim.h then
-        new_pan_y = 0
-    else
-        local pan_y = mp.get_property("video-pan-y")
-        local ry = (dim.mt + video_size[2] / 2 - mouse_pos_origin[2]) / (video_size[2] / 2)
-        new_pan_y = (pan_y * video_size[2] + ry * diff_height / 2) / new_height
-        if auto_c then
-            new_pan_y = clamp(new_pan_y, (dim.h - 2 * margin) / (2 * new_height) - 0.5, - (dim.h - 2 * margin) / (2 * new_height) + 0.5)
-        end
-    end
-
-    local zoom_origin = mp.get_property("video-zoom")
-    mp.command("no-osd set video-zoom " .. zoom_origin + zoom_inc .. "; no-osd set video-pan-x " .. clamp(new_pan_x, -3, 3) .. "; no-osd set video-pan-y " .. clamp(new_pan_y, -3, 3))
-end
-
-function align_border(x, y)
-    local dim = mp.get_property_native("osd-dimensions")
-    if not dim then return end
-    local video_size = { dim.w - dim.ml - dim.mr, dim.h - dim.mt - dim.mb }
-    local x, y = tonumber(x), tonumber(y)
-    local command = ""
-    if x then
-        command = command .. "no-osd set video-pan-x " .. clamp(- x * (dim.ml + dim.mr) / (2 * video_size[1]), -3, 3) .. ";"
-    end
-    if y then
-        command = command .. "no-osd set video-pan-y " .. clamp(- y * (dim.mt + dim.mb) / (2 * video_size[2]), -3, 3) .. ";"
-    end
-    if command ~= "" then
-        mp.command(command)
-    end
-end
-
-function pan_image(axis, amount, zoom_invariant, image_constrained)
-    amount = tonumber(amount)
-    if not amount or amount == 0 or axis ~= "x" and axis ~= "y" then return end
-    if zoom_invariant == "yes" then
-        amount = amount / 2 ^ mp.get_property_number("video-zoom")
-    end
-    local prop = "video-pan-" .. axis
-    local old_pan = mp.get_property_number(prop)
-    if image_constrained == "yes" then
-        local dim = mp.get_property_native("osd-dimensions")
-        if not dim then return end
-        local margin =
-            (axis == "x" and amount > 0) and dim.ml
-            or (axis == "x" and amount < 0) and dim.mr
-            or (amount > 0) and dim.mt
-            or (amount < 0) and dim.mb
-        local vid_size = (axis == "x") and (dim.w - dim.ml - dim.mr) or (dim.h - dim.mt - dim.mb)
-        local pixels_moved = math.abs(amount) * vid_size
-        -- the margin is already visible, no point going further
-        if margin >= 0 then
-            return
-        elseif margin + pixels_moved > 0 then
-            amount = -(math.abs(amount) / amount) * margin / vid_size
-        end
-    end
-    mp.set_property_number(prop, old_pan + amount)
-end
-
-function rotate_video(amt)
-    local rot = mp.get_property_number("video-rotate")
-    rot = (rot + amt) % 360
-    mp.set_property_number("video-rotate", rot)
-end
-
-function reset_pan_if_visible()
-    local dim = mp.get_property_native("osd-dimensions")
-    if not dim then return end
-    local command = ""
-    if (dim.ml + dim.mr >= 0) then
-        command = command .. "no-osd set video-pan-x 0" .. ";"
-    end
-    if (dim.mt + dim.mb >= 0) then
-        command = command .. "no-osd set video-pan-y 0" .. ";"
-    end
-    if command ~= "" then
-        mp.command(command)
-    end
-end
-
-mp.add_key_binding(nil, "drag-to-pan", drag_to_pan_handler, {complex = true})
-mp.add_key_binding(nil, "pan-follows-cursor", pan_follows_cursor_handler, {complex = true})
-mp.add_key_binding(nil, "cursor-centric-zoom", cursor_centric_zoom_handler)
-mp.add_key_binding(nil, "align-border", align_border)
-mp.add_key_binding(nil, "pan-image", pan_image)
-mp.add_key_binding(nil, "rotate-video", rotate_video)
-mp.add_key_binding(nil, "reset-pan-if-visible", reset_pan_if_visible)
-mp.add_key_binding(nil, "force-print-filename", force_print_filename)
diff --git a/.config/mpv/mvi/scripts/minimap.lua b/.config/mpv/mvi/scripts/minimap.lua
deleted file mode 100644
index f1b9a7d..0000000
--- a/.config/mpv/mvi/scripts/minimap.lua
+++ /dev/null
@@ -1,201 +0,0 @@
-local opts = {
-    enabled = true,
-    center = "92,92",
-    scale = 12,
-    max_size = "16,16",
-    image_opacity = "88",
-    image_color = "BBBBBB",
-    view_opacity = "BB",
-    view_color = "222222",
-    view_above_image = true,
-    hide_when_full_image_in_view = true,
-}
-
-local msg = require 'mp.msg'
-local assdraw = require 'mp.assdraw'
-local options = require 'mp.options'
-
-options.read_options(opts, nil, function(c)
-    if c["enabled"] then
-        if opts.enabled then
-            enable()
-        else
-            disable()
-        end
-    end
-    mark_stale()
-end)
-
-function split_comma(input)
-    local ret = {}
-    for str in string.gmatch(input, "([^,]+)") do
-        ret[#ret + 1] = tonumber(str)
-    end
-    return ret
-end
-
-local active = false
-local refresh = true
-
-function draw_ass(ass)
-    local ww, wh = mp.get_osd_size()
-    mp.set_osd_ass(ww, wh, ass)
-end
-
-function mark_stale()
-    refresh = true
-end
-
-function refresh_minimap()
-    if not refresh then return end
-    refresh = false
-
-    local dim = mp.get_property_native("osd-dimensions")
-    if not dim then
-        draw_ass("")
-        return
-    end
-    local ww, wh = dim.w, dim.h
-
-    if not (ww > 0 and wh > 0) then return end
-    if opts.hide_when_full_image_in_view then
-        if dim.mt >= 0 and dim.mb >= 0 and dim.ml >= 0 and dim.mr >= 0 then
-            draw_ass("")
-            return
-        end
-    end
-
-    local center = split_comma(opts.center)
-    center[1] = center[1] * 0.01 * ww
-    center[2] = center[2] * 0.01 * wh
-    local cutoff = split_comma(opts.max_size)
-    cutoff[1] = cutoff[1] * 0.01 * ww * 0.5
-    cutoff[2] = cutoff[2] * 0.01 * wh * 0.5
-
-    local a = assdraw.ass_new()
-    local draw = function(x, y, w, h, opacity, color)
-        a:new_event()
-        a:pos(center[1], center[2])
-        a:append("{\\bord0}")
-        a:append("{\\shad0}")
-        a:append("{\\c&" .. color .. "&}")
-        a:append("{\\2a&HFF}")
-        a:append("{\\3a&HFF}")
-        a:append("{\\4a&HFF}")
-        a:append("{\\1a&H" .. opacity .. "}")
-        w = w * 0.5
-        h = h * 0.5
-        a:draw_start()
-        local rounded = {true,true,true,true} -- tl, tr, br, bl
-        local x0,y0,x1,y1 = x-w, y-h, x+w, y+h
-        if x0 < -cutoff[1] then
-            x0 = -cutoff[1]
-            rounded[4] = false
-            rounded[1] = false
-        end
-        if y0 < -cutoff[2] then
-            y0 = -cutoff[2]
-            rounded[1] = false
-            rounded[2] = false
-        end
-        if x1 > cutoff[1] then
-            x1 = cutoff[1]
-            rounded[2] = false
-            rounded[3] = false
-        end
-        if y1 > cutoff[2] then
-            y1 = cutoff[2]
-            rounded[3] = false
-            rounded[4] = false
-        end
-
-        local r = 3
-        local c = 0.551915024494 * r
-        if rounded[0] then
-            a:move_to(x0 + r, y0)
-        else
-            a:move_to(x0,y0)
-        end
-        if rounded[1] then
-            a:line_to(x1 - r, y0)
-            a:bezier_curve(x1 - r + c, y0, x1, y0 + r - c, x1, y0 + r)
-        else
-            a:line_to(x1, y0)
-        end
-        if rounded[2] then
-            a:line_to(x1, y1 - r)
-            a:bezier_curve(x1, y1 - r + c, x1 - r + c, y1, x1 - r, y1)
-        else
-            a:line_to(x1, y1)
-        end
-        if rounded[3] then
-            a:line_to(x0 + r, y1)
-            a:bezier_curve(x0 + r - c, y1, x0, y1 - r + c, x0, y1 - r)
-        else
-            a:line_to(x0, y1)
-        end
-        if rounded[4] then
-            a:line_to(x0, y0 + r)
-            a:bezier_curve(x0, y0 + r - c, x0 + r - c, y0, x0 + r, y0)
-        else
-            a:line_to(x0, y0)
-        end
-        a:draw_stop()
-    end
-    local image = function()
-        draw((dim.ml/2 - dim.mr/2) / opts.scale,
-             (dim.mt/2 - dim.mb/2) / opts.scale,
-             (ww - dim.ml - dim.mr) / opts.scale,
-             (wh - dim.mt - dim.mb) / opts.scale,
-             opts.image_opacity,
-             opts.image_color)
-    end
-    local view = function()
-        draw(0,
-             0,
-             ww / opts.scale,
-             wh / opts.scale,
-             opts.view_opacity,
-             opts.view_color)
-    end
-    if opts.view_above_image then
-        image()
-        view()
-    else
-        view()
-        image()
-    end
-    draw_ass(a.text)
-end
-
-function enable()
-    if active then return end
-    active = true
-    mp.observe_property("osd-dimensions", nil, mark_stale)
-    mp.register_idle(refresh_minimap)
-    mark_stale()
-end
-
-function disable()
-    if not active then return end
-    active = false
-    mp.unobserve_property(mark_stale)
-    mp.unregister_idle(refresh_minimap)
-    draw_ass("")
-end
-
-function toggle()
-    if active then
-        disable()
-    else
-        enable()
-    end
-end
-
-if opts.enabled then
-    enable()
-end
-
-mp.add_key_binding(nil, "minimap-enable", enable)
-mp.add_key_binding(nil, "minimap-disable", disable)
-mp.add_key_binding(nil, "minimap-toggle", toggle)
diff --git a/.config/mpv/mvi/scripts/mouse_coords.lua b/.config/mpv/mvi/scripts/mouse_coords.lua
deleted file mode 120000
index ecd3896..0000000
--- a/.config/mpv/mvi/scripts/mouse_coords.lua
+++ /dev/null
@@ -1 +0,0 @@
-../../scripts/mouse_coords.lua
\ No newline at end of file
diff --git a/.config/mpv/mvi/scripts/ruler.lua b/.config/mpv/mvi/scripts/ruler.lua
deleted file mode 100644
index 2cfcd0f..0000000
--- a/.config/mpv/mvi/scripts/ruler.lua
+++ /dev/null
@@ -1,314 +0,0 @@
-local opts = {
-    show_distance = true,
-    show_coordinates = true,
-    coordinates_space = "image",
-    show_angles = "degrees",
-    line_width = 2,
-    dots_radius = 3,
-    font_size = 36,
-    line_color = "33",
-    confirm_bindings = "MBTN_LEFT,ENTER",
-    exit_bindings = "ESC",
-    set_first_point_on_begin = false,
-    clear_on_second_point_set = false,
-}
-
-local options = require 'mp.options'
-local msg = require 'mp.msg'
-local assdraw = require 'mp.assdraw'
-
-local state = 0 -- {0,1,2,3} = {inactive,setting first point,setting second point,done}
-local first_point = nil -- in normalized video space coordinates
-local second_point = nil -- in normalized video space coordinates
-local video_dimensions_stale = false
-
-function split(input)
-    local ret = {}
-    for str in string.gmatch(input, "([^,]+)") do
-        ret[#ret + 1] = str
-    end
-    return ret
-end
-
-local confirm_bindings = split(opts.confirm_bindings)
-local exit_bindings = split(opts.exit_bindings)
-
-options.read_options(opts, nil, function()
-    if state ~= 0 then
-        remove_bindings()
-    end
-    confirm_bindings = split(opts.confirm_bindings)
-    exit_bindings = split(opts.exit_bindings)
-    if state ~= 0 then
-        add_bindings()
-        mark_stale()
-    end
-end)
-
-function draw_ass(ass)
-    local ww, wh = mp.get_osd_size()
-    mp.set_osd_ass(ww, wh, ass)
-end
-
-
-function cursor_video_space_normalized(dim)
-    local mx, my = mp.get_mouse_pos()
-    local ret = {}
-    ret[1] = (mx - dim.ml) / (dim.w - dim.ml - dim.mr)
-    ret[2] = (my - dim.mt) / (dim.h - dim.mt - dim.mb)
-    return ret
-end
-
-function refresh()
-    if not video_dimensions_stale then return end
-    video_dimensions_stale = false
-
-    local dim = mp.get_property_native("osd-dimensions")
-    local out_params = mp.get_property_native("video-out-params")
-    if not dim or not out_params then
-        draw_ass("")
-        return
-    end
-    local vid_width = out_params.dw
-    local vid_height = out_params.dh
-
-    function video_space_normalized_to_video(point)
-        local ret = {}
-        ret[1] = point[1] * vid_width
-        ret[2] = point[2] * vid_height
-        return ret
-    end
-    function video_space_normalized_to_screen(point)
-        local ret = {}
-        ret[1] = point[1] * (dim.w - dim.ml - dim.mr) + dim.ml
-        ret[2] = point[2] * (dim.h - dim.mt - dim.mb) + dim.mt
-        return ret
-    end
-
-    local line_start = {}
-    local line_end = {}
-    if second_point then
-        line_start.image = video_space_normalized_to_video(first_point)
-        line_start.screen = video_space_normalized_to_screen(first_point)
-        line_end.image = video_space_normalized_to_video(second_point)
-        line_end.screen = video_space_normalized_to_screen(second_point)
-    elseif first_point then
-        line_start.image = video_space_normalized_to_video(first_point)
-        line_start.screen = video_space_normalized_to_screen(first_point)
-        line_end.image = video_space_normalized_to_video(cursor_video_space_normalized(dim))
-        line_end.screen = {}
-        line_end.screen[1], line_end.screen[2] = mp.get_mouse_pos()
-    else
-        local mx, my = mp.get_mouse_pos()
-        line_start.image = video_space_normalized_to_video(cursor_video_space_normalized(dim))
-        line_start.screen = {}
-        line_start.screen[1], line_start.screen[2] = mp.get_mouse_pos()
-        line_end = line_start
-    end
-    local distinct = (math.abs(line_start.screen[1] - line_end.screen[1]) >= 1
-                   or math.abs(line_start.screen[2] - line_end.screen[2]) >= 1)
-
-    local a = assdraw:ass_new()
-    local draw_setup = function(bord)
-        a:new_event()
-        a:pos(0,0)
-        a:append("{\\bord" .. bord .. "}")
-        a:append("{\\shad0}")
-        local r = opts.line_color
-        a:append("{\\3c&H".. r .. r .. r .. "&}")
-        a:append("{\\1a&HFF}")
-        a:append("{\\2a&HFF}")
-        a:append("{\\3a&H00}")
-        a:append("{\\4a&HFF}")
-        a:draw_start()
-    end
-    local dot = function(pos, size)
-        draw_setup(size)
-        a:move_to(pos[1], pos[2]-0.5)
-        a:line_to(pos[1], pos[2]+0.5)
-    end
-    local line = function(from, to, size)
-        draw_setup(size)
-        a:move_to(from[1], from[2])
-        a:line_to(to[1], to[2])
-    end
-    if distinct then
-        dot(line_start.screen, opts.dots_radius)
-        line(line_start.screen, line_end.screen, opts.line_width)
-        dot(line_end.screen, opts.dots_radius)
-    else
-        dot(line_start.screen, opts.dots_radius)
-    end
-
-    local line_info = function()
-        if not opts.show_distance then return end
-        a:new_event()
-        a:append("{\\fs36}{\\bord1}")
-        a:pos((line_start.screen[1] + line_end.screen[1]) / 2, (line_start.screen[2] + line_end.screen[2]) / 2)
-        local an = 1
-        if line_start.image[1] < line_end.image[1] then an = an + 2 end
-        if line_start.image[2] < line_end.image[2] then an = an + 6 end
-        a:an(an)
-        local image = math.sqrt(math.pow(line_start.image[1] - line_end.image[1], 2) + math.pow(line_start.image[2] - line_end.image[2], 2))
-        local screen = math.sqrt(math.pow(line_start.screen[1] - line_end.screen[1], 2) + math.pow(line_start.screen[2] - line_end.screen[2], 2))
-        if opts.coordinates_space == "both" then
-            a:append(string.format("image: %.1f\\Nscreen: %.1f", image, screen))
-        elseif opts.coordinates_space == "image" then
-            a:append(string.format("%.1f", image))
-        elseif opts.coordinates_space == "window" then
-            a:append(string.format("%.1f", screen))
-        end
-    end
-    local dot_info = function(pos, opposite)
-        if not opts.show_coordinates then return end
-        a:new_event()
-        a:append("{\\fs" .. opts.font_size .."}{\\bord1}")
-        a:pos(pos.screen[1], pos.screen[2])
-        local an
-        if distinct then
-            an = 1
-            if line_start.image[1] > line_end.image[1] then an = an + 2 end
-            if line_start.image[2] < line_end.image[2] then an = an + 6 end
-        else
-            an = 7
-        end
-        if opposite then
-            an = 9 + 1 - an
-        end
-        a:an(an)
-        if opts.coordinates_space == "both" then
-            a:append(string.format("image: %.1f, %.1f\\Nscreen: %i, %i",
-                pos.image[1], pos.image[2], pos.screen[1], pos.screen[2]))
-        elseif opts.coordinates_space == "image" then
-            a:append(string.format("%.1f, %.1f", pos.image[1], pos.image[2]))
-        elseif opts.coordinates_space == "window" then
-            a:append(string.format("%i, %i", pos.screen[1], pos.screen[2]))
-        end
-    end
-    dot_info(line_start, true)
-    if distinct then
-        line_info()
-        dot_info(line_end, false)
-    end
-    if distinct and opts.show_angles ~= "no" then
-        local dist = 50
-        local pos_from_angle = function(mult, angle)
-            return {
-                line_start.screen[1] + mult * dist * math.cos(angle),
-                line_start.screen[2] + mult * dist * math.sin(angle),
-            }
-        end
-        local extended = { line_start.screen[1], line_start.screen[2] }
-        if line_end.screen[1] > line_start.screen[1] then
-            extended[1] = extended[1] + dist
-        else
-            extended[1] = extended[1] - dist
-        end
-        line(line_start.screen, extended, math.max(0, opts.line_width-0.5))
-        local angle = math.atan(math.abs(line_start.image[2] - line_end.image[2]) / math.abs(line_start.image[1] - line_end.image[1]))
-        local fix_angle
-        local an
-        if line_end.image[2] < line_start.image[2] and line_end.image[1] > line_start.image[1] then
-            -- upper-right
-            an = 4
-            fix_angle = function(angle) return - angle end
-        elseif line_end.image[2] < line_start.image[2] then
-            -- upper-left
-            an = 6
-            fix_angle = function(angle) return math.pi + angle end
-        elseif line_end.image[1] < line_start.image[1] then
-            -- bottom-left
-            an = 6
-            fix_angle = function(angle) return math.pi - angle end
-        else
-            -- bottom-right
-            an = 4
-            fix_angle = function(angle) return angle end
-        end
-        -- should implement this https://math.stackexchange.com/questions/873224/calculate-control-points-of-cubic-bezier-curve-approximating-a-part-of-a-circle
-        local cp1 = pos_from_angle(1, fix_angle(angle*1/4))
-        local cp2 = pos_from_angle(1, fix_angle(angle*3/4))
-        local p2 = pos_from_angle(1, fix_angle(angle))
-        a:bezier_curve(cp1[1], cp1[2], cp2[1], cp2[2], p2[1], p2[2])
-
-        a:new_event()
-        a:append("{\\fs" .. opts.font_size .."}{\\bord1}")
-        local text_pos = pos_from_angle(1.1, fix_angle(angle*2/3)) -- you'd think /2 would make more sense, but *2/3  looks better
-        a:pos(text_pos[1], text_pos[2])
-        a:an(an)
-        if opts.show_angles == "both" then
-            a:append(string.format("%.2f\\N%.1f°", angle, angle / math.pi * 180))
-        elseif opts.show_angles == "degrees" then
-            a:append(string.format("%.1f°", angle / math.pi * 180))
-        elseif opts.show_angles == "radians" then
-            a:append(string.format("%.2f", angle))
-        end
-    end
-
-    draw_ass(a.text)
-end
-
-function mark_stale()
-    video_dimensions_stale = true
-end
-
-function add_bindings()
-    mp.add_forced_key_binding("mouse_move", "ruler-mouse-move", mark_stale)
-    for _, key in ipairs(confirm_bindings) do
-        mp.add_forced_key_binding(key, "ruler-next-" .. key, next_step)
-    end
-    for _, key in ipairs(exit_bindings) do
-        mp.add_forced_key_binding(key, "ruler-stop-" .. key, stop)
-    end
-end
-
-function remove_bindings()
-    for _, key in ipairs(confirm_bindings) do
-        mp.remove_key_binding("ruler-next-" .. key)
-    end
-    for _, key in ipairs(exit_bindings) do
-        mp.remove_key_binding("ruler-stop-" .. key)
-    end
-    mp.remove_key_binding("ruler-mouse-move")
-end
-
-function next_step()
-    if state == 0 then
-        state = 1
-        mp.register_idle(refresh)
-        mp.observe_property("osd-dimensions", nil, mark_stale)
-        mark_stale()
-        add_bindings()
-        if opts.set_first_point_on_begin then
-            next_step()
-        end
-    elseif state == 1 then
-        local dim = mp.get_property_native("osd-dimensions")
-        if not dim then return end
-        state = 2
-        first_point = cursor_video_space_normalized(dim)
-    elseif state == 2 then
-        local dim = mp.get_property_native("osd-dimensions")
-        if not dim then return end
-        state = 3
-        second_point = cursor_video_space_normalized(dim)
-        if opts.clear_on_second_point_set then
-            next_step()
-        end
-    else
-        stop()
-    end
-end
-
-function stop()
-    if state == 0 then return end
-    mp.unregister_idle(refresh)
-    mp.unobserve_property(mark_stale)
-    remove_bindings()
-    state = 0
-    first_point = nil
-    second_point = nil
-    draw_ass("")
-end
-
-mp.add_key_binding(nil, "ruler", next_step)
diff --git a/.config/mpv/mvi/scripts/status-line.lua b/.config/mpv/mvi/scripts/status-line.lua
deleted file mode 100644
index 7ac5168..0000000
--- a/.config/mpv/mvi/scripts/status-line.lua
+++ /dev/null
@@ -1,142 +0,0 @@
-local opts = {
-    enabled = true,
-    size = 36,
-    margin = 10,
-    text_top_left = "",
-    text_top_right = "",
-    text_bottom_left = "${filename} [${playlist-pos-1}/${playlist-count}]",
-    text_bottom_right = "[${dwidth:X}x${dheight:X}]",
-}
-
-local msg = require 'mp.msg'
-local assdraw = require 'mp.assdraw'
-local options = require 'mp.options'
-
-options.read_options(opts, nil, function(c)
-    if c["enabled"] then
-        if opts.enabled then
-            enable()
-        else
-            disable()
-        end
-    end
-    if c["size"] or c["margin"] then
-        mark_stale()
-    end
-    if c["text_top_left"] or
-       c["text_top_right"] or
-       c["text_bottom_left"] or
-       c["text_bottom_right"]
-    then
-        observe_properties()
-        mark_stale()
-    end
-end)
-
-local stale = true
-local active = false
-
-function draw_ass(ass)
-    local ww, wh = mp.get_osd_size()
-    mp.set_osd_ass(ww, wh, ass)
-end
-
-function refresh()
-    if not stale then return end
-    stale = false
-    local a = assdraw:ass_new()
-    local draw_text = function(text, an, x, y)
-        if text == "" then return end
-        local expanded = mp.command_native({ "expand-text", text})
-        if not expanded then
-            msg.error("Error expanding status-line")
-            return
-        end
-        msg.verbose("Status-line changed to: " .. expanded)
-        a:new_event()
-        a:an(an)
-        a:pos(x,y)
-        a:append("{\\fs".. opts.size.. "}{\\bord1.0}")
-        a:append(expanded)
-    end
-    local w,h = mp.get_osd_size()
-    local m = opts.margin
-    draw_text(opts.text_top_left, 7, m, m)
-    draw_text(opts.text_top_right, 9, w-m, m)
-    draw_text(opts.text_bottom_left, 1, m, h-m)
-    draw_text(opts.text_bottom_right, 3, w-m, h-m)
-    draw_ass(a.text)
-end
-
-function mark_stale()
-    stale = true
-end
-
-function observe_properties()
-    mp.unobserve_property(mark_stale)
-    if not active then return end
-    for _, str in ipairs({
-        opts.text_top_left,
-        opts.text_top_right,
-        opts.text_bottom_left,
-        opts.text_bottom_right,
-    }) do
-        local start = 0
-        while true do
-            local s, e, cap = string.find(str, "%${[?!]?([%l%d-/]*)", start)
-            if not s then break end
-            msg.verbose("Observing property " .. cap)
-            mp.observe_property(cap, nil, mark_stale)
-            start = e
-        end
-    end
-    mp.observe_property("osd-width", nil, mark_stale)
-    mp.observe_property("osd-height", nil, mark_stale)
-end
-
-function enable()
-    if active then return end
-    active = true
-    observe_properties()
-    mp.register_idle(refresh)
-    mark_stale()
-end
-
-
-function disable()
-    if not active then return end
-    active = false
-    observe_properties()
-    mp.unregister_idle(refresh)
-    draw_ass("")
-end
-
-function toggle()
-    if active then
-        disable()
-    else
-        enable()
-    end
-end
-
-if opts.enabled then
-    enable()
-end
-
-mp.add_key_binding(nil, "status-line-enable", enable)
-mp.add_key_binding(nil, "status-line-disable", disable)
-mp.add_key_binding(nil, "status-line-toggle", toggle)
-
--- TODO remove
-mp.add_key_binding(nil, "enable-status-line", function()
-    msg.warn("This binding is deprecated, use 'status-line-enable' instead")
-    enable()
-end)
-mp.add_key_binding(nil, "disable-status-line", function()
-    msg.warn("This binding is deprecated, use 'status-line-disable' instead")
-    disable()
-end)
-mp.add_key_binding(nil, "toggle-status-line", function()
-    msg.warn("This binding is deprecated, use 'status-line-toggle' instead")
-    toggle()
-end)