From 9dc97def590951217b492782357bf3e3fc365e5f Mon Sep 17 00:00:00 2001 From: Robert Günzler Date: Wed, 16 Apr 2025 15:04:54 +0200 Subject: adapt sony-wf1000xm3-battery page to new styles MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Robert Günzler --- src/inc/sony-wf1000xm3-battery.htm | 50 +++++++++++++++++++------------------- src/inc/sony-wf1000xm3-battery.md | 14 +++++------ 2 files changed, 32 insertions(+), 32 deletions(-) (limited to 'src/inc') diff --git a/src/inc/sony-wf1000xm3-battery.htm b/src/inc/sony-wf1000xm3-battery.htm index 74c7b08..3692a32 100644 --- a/src/inc/sony-wf1000xm3-battery.htm +++ b/src/inc/sony-wf1000xm3-battery.htm @@ -7,8 +7,8 @@ replacement

I’ve had these since 2021, while they are a bit bulky I am happy with them and use them mostly around the city to listen to podcasts and the occasional bit of music.

-

+

After they would first slowly show signs of not holding their full charge anymore, the batteries completely died on me after some 3 years. I was fully prepared to have to throw them out when I learned that the @@ -22,38 +22,38 @@ batteries are just standard cells and can be easily swapped.

Ok, let’s go:

pry open pry open lid off Use a spudger or ideally two guitar -picks and wedge them in to the thin gap between the top cover and the -base of the earphones. Don’t worry about breaking anything. As long as -the material of your tools is plastic, you won’t damage anything. This -is by far the most tedious step of the process (if you don’t have the -picks). There is a little bit of adhesive behind the lid, so once you -get the halfs to seperate you might have to widdgle a little.

+class="size-s float-l" alt="lid off" /> Use a spudger or ideally two +guitar picks and wedge them in to the thin gap between the top cover and +the base of the earphones. Don’t worry about breaking anything. As long +as the material of your tools is plastic, you won’t damage anything. +This is by far the most tedious step of the process (if you don’t have +the picks). There is a little bit of adhesive behind the lid, so once +you get the halfs to seperate you might have to widdgle a little.

screws out screws out lift top With the phillips head remove the two -screws that secure the visible part in place and then carefully lift it -out, flip it over. There is a ribbon cable connecting the touch sensor -and LED on the top to PCB deeper inside the earpiece.

+class="size-s float-r" alt="lift top" /> With the phillips head remove +the two screws that secure the visible part in place and then carefully +lift it out, flip it over. There is a ribbon cable connecting the touch +sensor and LED on the top to PCB deeper inside the earpiece.

battery out To remove the old battery I found -it easiest to push the spudger into the little gap in the plastic where -the ribbon cable connects to the top part. It is also glued in; be +class="size-s float-l" alt="battery out" /> To remove the old battery I +found it easiest to push the spudger into the little gap in the plastic +where the ribbon cable connects to the top part. It is also glued in; be careful not to pull out the contact points as well. If possible try to preserve the glue, it will come in handy when securing the new battery in place. I also scraped off what was stuck to the old battery and pushed it back into the housing.

battery in Before putting in the new battery -make sure to check the writing on it or use the shape as a reference to -figure out which side is the negative pole. Put that side down, touching -to the contacts. The replacement batteries I got where a different brand -and had all the labeling on the plus pole. While the original VARTA -branded batteries had it exactly reversed. On my first attempt I didn’t -pay attention and put them in the wrong way around.

+class="size-s float-r" alt="battery in" /> Before putting in the new +battery make sure to check the writing on it or use the shape as a +reference to figure out which side is the negative pole. Put that side +down, touching to the contacts. The replacement batteries I got where a +different brand and had all the labeling on the plus pole. While the +original VARTA branded batteries had it exactly reversed. On my first +attempt I didn’t pay attention and put them in the wrong way around.

battery comparison diff --git a/src/inc/sony-wf1000xm3-battery.md b/src/inc/sony-wf1000xm3-battery.md index af910b8..1c799c2 100644 --- a/src/inc/sony-wf1000xm3-battery.md +++ b/src/inc/sony-wf1000xm3-battery.md @@ -8,7 +8,7 @@ I've had these since 2021, while they are a bit bulky I am happy with them and use them mostly around the city to listen to podcasts and the occasional bit of music. -![](/media/content/sony-wf1000xm3-battery/headphones.jpg) +![](/media/content/sony-wf1000xm3-battery/headphones.jpg){class=size-l} After they would first slowly show signs of not holding their full charge anymore, the batteries completely died on me after some 3 years. I was fully @@ -24,8 +24,8 @@ Before you start, get the following: Ok, let's go: -![pry open](/media/content/sony-wf1000xm3-battery/01_pry_open.jpg){class="sm left"} -![lid off](/media/content/sony-wf1000xm3-battery/02_lid_off.jpg){class="sm right"} +![pry open](/media/content/sony-wf1000xm3-battery/01_pry_open.jpg){class="size-s float-l"} +![lid off](/media/content/sony-wf1000xm3-battery/02_lid_off.jpg){class="size-s float-l"} Use a spudger or ideally two guitar picks and wedge them in to the thin gap between the top cover and the base of the earphones. Don't worry about breaking anything. As long as the material of your tools is plastic, you won't damage @@ -33,14 +33,14 @@ anything. This is by far the most tedious step of the process (if you don't have the picks). There is a little bit of adhesive behind the lid, so once you get the halfs to seperate you might have to widdgle a little. -![screws out](/media/content/sony-wf1000xm3-battery/03_screws_out.jpg){class="sm left"} -![lift top](/media/content/sony-wf1000xm3-battery/04_lift_top.jpg){class="sm right"} +![screws out](/media/content/sony-wf1000xm3-battery/03_screws_out.jpg){class="size-s float-r"} +![lift top](/media/content/sony-wf1000xm3-battery/04_lift_top.jpg){class="size-s float-r"} With the phillips head remove the two screws that secure the visible part in place and then carefully lift it out, flip it over. There is a ribbon cable connecting the touch sensor and LED on the top to PCB deeper inside the earpiece. -![battery out](/media/content/sony-wf1000xm3-battery/05_battery_out.jpg){class="sm left"} +![battery out](/media/content/sony-wf1000xm3-battery/05_battery_out.jpg){class="size-s float-l"} To remove the old battery I found it easiest to push the spudger into the little gap in the plastic where the ribbon cable connects to the top part. It is also glued in; be careful not to pull out the contact points as well. If @@ -48,7 +48,7 @@ possible try to preserve the glue, it will come in handy when securing the new battery in place. I also scraped off what was stuck to the old battery and pushed it back into the housing. -![battery in](/media/content/sony-wf1000xm3-battery/06_battery_in.jpg){class="sm right"} +![battery in](/media/content/sony-wf1000xm3-battery/06_battery_in.jpg){class="size-s float-r"} Before putting in the new battery make sure to check the writing on it or use the shape as a reference to figure out which side is the negative pole. Put that side down, touching to the contacts. -- cgit 1.4.1